User Manual V2.0

Diagnostics Operations
24
Button
Name
Description
Data
Logging
Records the communication data and ECU
information of the test vehicle. The saved data can
be reported and sent to the technical center via the
internet.
You can go to the Support application to follow up
the processing progress, see 10.5 Data Logging on
page 82 for detailed information.
Send
Tapping this button submits the Data Logging report
to the technical center via the internet.
 To print data in Diagnostics
1. Tap the Diagnostics application button from the MaxiSys Job
Menu. The Print button on the diagnostic toolbar is available
throughout the whole Diagnostics operations.
2. Tap Print whenever you want to make a printing. A drop-down
menu appears.
a) Print This Page – prints a screenshot copy of the current
screen
b) Print All Page – prints a PDF copy of all displayed data
3. A temporary file will be created and send to the computer for
printing.
4. When the file is transferred successfully, a confirmation message
displays.
NOTE: Make sure the Display Tablet is connected to the computer network,
either via Wi-Fi or LAN, before printing. For more instructions on printing, see
3.3.1 Printing Operation on page 14 for details.
 To submit Data Logging reports in Diagnostics
1. Tap the Diagnostics application button from the MaxiSys Job
Menu. The Data Logging button on the Diagnostic Toolbar is
available throughout the whole Diagnostics operations.
2. Tap the Data Logging button. The button displays blue during the
active recording process.