User Manual V2.0

Diagnostics Operations
37
options; one displays the selected parameter items, the other displays all
the available items.
Setting – tapping this button opens a setting screen, which allows you to
set the trigger mode, recording duration, and various threshold values for
data recording, and make other controls.
Figure 4- 11 Sample Setting Mode in Live Data
There are four navigation buttons on top of the Setting mode screen.
 Range Button – displays the configuration screen on which you
can set the threshold values, an upper limit and a lower limit, for
triggering the buzzer alarm. This function is only applied to the
Waveform Graph display mode.
a) MIN – tapping which opens a virtual keyboard, allowing you to
enter the required lower limit value
b) MAX – tapping which opens a virtual keyboard, allowing you
to enter the required upper limit value
c) Buzzer Alarm – switches the alarm on and off. The alarm
function makes a beep sound as a reminder whenever the
data reading reaches the preset minimum or maximum point
 To set threshold limits for the parameter values
1. Tap the Setting functional button at the bottom of the Live
Data screen.