User Manual
96
17 Digital Inspection
The Digital Inspection application configures the MaxiSys Diagnostic Device to operate
as a digital video scope by simply connecting the tablet to a Digital Inspection Camera.
This function allows you to examine difficult-to-reach areas normally hidden from sight,
with the ability to record digital still images and videos, which offers you an economical
solution to inspect machinery, facilities, and infrastructure in a safe and quick way.
WARNINGS & IMPORTANTS:
Follow these instructions to reduce the risk of injury from electric shock, entanglement
and other causes and prevent tool damage.
⚫ Do not place the image head and cable into anything or anywhere that may contain
a live electric charge or moving parts, which increases the risk of electric shock or
entanglement injuries.
⚫ Do not use the image head cable to modify surroundings, clear pathways or
clogged areas.
⚫ When inspection is completed, carefully withdraw the imager head cable from the
inspection area.
⚫ The image head cable are waterproof to a depth of 3m (10’), greater depths may
cause leakage into the imager head cable and cause electric shock or damage the
tool.
⚫ The working temperature of the imager head is between 32 °F (0 °C) and 113 °F
(45 °C).
Check-Ups:
✓ FOR AUTOMOBILES: Ensure the automobile is not running during inspection.
Metal and liquid under the hood may be hot. Don’t get oil or gas on the imager
head.
✓ FOR PIPES: If you suspect a metal pipe could contain an electric charge, have a
qualified electrician to check the pipe before using.
✓ FOR WALLS: For inspecting the inside walls, be sure to shut off the circuit breaker
to the whole house before using the tool.
✓ WORK AREA: Ensure the work area has sufficient light.