User Manual

41
complete the tests. Each time when an operation is successfully executed, message
such as “Command Finished”, “Activation Successful”, or something similar displays.
Tap the ESC functional button to exit the test when finished.
Special Functions
These functions perform various component adaptations, allowing you to recalibrate or
configure certain components after making repairs or replacement.
The main section of the Adaptation Operation screen displays a list of operational and
vehicle status information, which mainly consists of four parts:
1. The first part in the top line shows the description of the operation being performed,
and the execution status is displayed on the right, such as Completed, or Activated,
etc.
2. The second part shows the preconditions or requirements for executing the
operation being selected.
3. The third part displays the current conditions of the vehicle control module being
learned for comparison to the preconditions suggested by the second part. If the
current condition of the control module is out of the suggested limit value, you must
adjust the vehicle condition to meet the requirement.
4. The last part displays the instruction of how to use the functional button at the
lower right corner of the screen to manipulate the teach-in operations.
Figure 4-14 Sample Adaptation Operation Screen
Read the information carefully and check the vehicle condition accordingly, when you
are sure that the vehicle is ready to perform the adaptation, simply follow the instruction
provided to make appropriate selections. When the operation is done, an execution
status message such as Completed, Finished or Successful, displays.