User Manual

NOTE

Damage to the vehicle electronic control module (ECM) may occur if communication is

disrupted. Make sure the all connections, such as data cable, USB cable, and wireless

or wired network, are properly connected at all times during testing. Exit all tests before

disconnecting the test cable or powering down the tool.

➢ To exit the Diagnostics application

1. From an active diagnostic screen, tap the Back or ESC functional button to

exit a diagnostic session step-by-step; Or

2. Tap the Vehicle Swap button on the diagnostics toolbar to return to the

Vehicle Menu screen.

3. From the vehicle menu screen, tap the Home button on the top toolbar; or tap

the Back button on the navigation bar at the bottom of the screen. Or

4. Tap the Home button on the diagnostics toolbar to exit the application directly

to the MaxiSys Job Menu.

Now, the Diagnostics application is no longer communicating with the vehicle and it is

safe to open other MaxiSys applications, or exit the MaxiSys Diagnostic System and

return to the Android System’s Home screen.