User Manual

76
3. Click Test Print to make sure the printer is working successfully.
4. Tap the Print button on the toolbar of the tablet. A test document will be sent to
the computer.
⚫ If the Auto Print option in the MaxiSys Printer is selected, the MaxiSys
Printer will print the received document automatically.
⚫ If the Auto Print option is not selected, click Open PDF File button to
view all the temporary files. Select the file(s) to print and click Print.
NOTE
Make sure the computer installed with the Printing Services program is connected to a
printer.
Wired Network
This option allows you to enable or disable the wired network connectivity, as well as to
perform Ethernet configuration.
➢ To operate Ethernet configuration
1. Tap Settings on the MaxiSys Job Menu.
2. Tap Wired Network on the left column.
3. Tap ON/OFF to enable the Wired Network connection. If the connectivity is
enabled the button turns blue, or if disabled the button turns gray.
4. Tap the button to the right of the Ethernet Configuration option, a setup
window displays.
5. Select a connection type:
⚫ DHCP – obtains the LAN IP address automatically.
⚫ Static IP – allows manual input of IP address.
a. If Static IP is selected, you need to enter the IP values manually.
NOTE
If you are not sure about the specific IP address values, please contact your network
administrator.
b. Tap Save to save the Ethernet configuration setting; or tap Cancel to exit
without saving.
c. Tap the Home button on the top left corner to return to the MaxiSys Job
Menu. Or select another setting option for the system setup.
Notification Center
This option allows you to turn the Notification Center function on or off. The Notification
Center function configures the MaxiSys tablet to receive regular online messages from