User Manual

81
11 VCI Manager
This application allows you to pair the tablet with the VCI device, MaxiFlash Elite and to
check the communication status.
Figure 11-1 Sample VCI Manager Screen
1. Connection Mode – there are two connection modes available for selection. The
connection state is displayed alongside.
⚫ BT Pairing – when paired to a wireless device, the connection state displays
as Paired; otherwise it displays as Unpaired.
⚫ Update (for VCI software only) – updates VCI software via Internet through the
MaxiSys tablet networking using USB connection.
➢ Select a connection mode to manage and set up connection.
2. Settings – this section allows you to manage wireless pairing or set up network
connection.
⚫ BT Setting – searches and displays the type and partial serial number for all of
the devices available for pairing. Tap a required device to start pairing. The BT
status icon displayed to the left of the device name indicates the received
signal strength.
⚫ Ethernet Setting – allows you to perform network configuration.