User Manual V2.0 EN190628

21
Figure 4-3 Manual VIN Input
5. Tap Done. The vehicle will be identified in a few seconds, and once the
matching is successful, the system will guide you to the Vehicle Diagnostics
screen directly.
6. Tap Cancel to exit Manual Input.
Manual Vehicle Selection
When the vehicle’s VIN is not automatically retrievable through the vehicle's ECU, or
the specific VIN is unknown, you can choose to select the vehicle manually.
Step-by-step Vehicle Selection
This mode of vehicle selection is menu driven; you simply follow the screen prompts
and make a series of choices. Each selection you make advances you to the next
screen. A Back button at the lower right corner of the screen returns you to the
previous screen. Exact procedures may vary somewhat by various vehicles being
serviced.
Alternative Vehicle Identification
Occasionally, you may identify a test vehicle that the tester does not recognize; the
database does not support, or has some unique characteristics that prevent it from
communicating with the tester through the normal channels. In these instances, you are
provided with the OBD direct entry, through which you can perform generic OBD II or
EOBD tests. See Generic OBD II Operations on page 37 for additional information.
Navigation
This section describes how to navigate the Diagnostics interface and select test
options.
Diagnostics Screen Layout
The Diagnostics screens typically include four sections.