User Manual V2.0 EN190628

26
vehicle.
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the systems on
the vehicle’s ECU in order to locate fault systems and retrieve DTCs. The sample
operation interface of Auto Scan displays as below:
Figure 4-5 Sample Auto Scan Operation Screen
1. Navigation Bar
2. Main Section
3. Functional Buttons
Navigation Bar
1. List Tab – displays the scanned data in list format
2. Tree Tab – display the scanned data in system distribution diagram format
3. Progress Bar – indicates the test progress
Main Section
A. List Tab
Column 1 – displays the system numbers.
Column 2 – displays the scanned systems.
Column 3 – displays the diagnostic marks indicating different conditions of the test
result.
 -!-: Indicates that the scanned system may not support the code reading
function, or there is a communication error between the tester and the control
system.