User Manual V2.0 EN190628

31
3. Tap ESC on the confirming screen to exit Erase Codes.
4. Check the Read Codes function again to ensure the operation is successful.
Live Data
When this function is selected, the screen displays the data list for the selected module.
The data available for any control module varies from one vehicle to another. The
parameters display in the order that they are transmitted by the ECM, so expect
variation among vehicles.
Gesture scrolling allows you to quickly move through the data list. Touch the screen
and drag your finger up or down to reposition the parameters being displayed if the data
populates more than one screen. The figure below displays a typical Live Data screen:
Figure 4-9 Sample Live Data Screen
1. Diagnostics Toolbar Buttons – tap the drop-down button at the top center of the
screen displays the toolbar buttons. See Table 4-2 Diagnostics Toolbar Buttons on
page 22 for detailed descriptions of the operations for each button.
2. Main Section
⚫ Name Column – this column displays the parameter names.
a) Check Box – tap the check box at the left side of the parameter name to
make selection of an item. Tap the check box again to deselect the item.
b) Drop-down Button – tap the drop-down button at the right side of the
parameter name to open a submenu, which provides optional modes by
which to display the data.
⚫ Value Column – displays the values of the parameter items.
⚫ Range Column – displays the minimum and the maximum limit value.
⚫ Unit Column – displays the unit for the parameter values.