User Manual V2.0 EN190628

34
items.
 Setting – tap button to open a setting screen, which allows you to set the
trigger mode, recording duration, and various threshold values for data
recording, and make other controls.
Figure 4-10 Sample Setting Mode in Live Data
There are four navigation buttons on top of the Setting mode screen.
⚫ Range – displays the configuration screen on which you can set the
threshold values, an upper limit and a lower limit, for triggering the buzzer
alarm. This function is only applied to the Waveform Graph display mode.
a) MIN – tap button to open a virtual keyboard to enter the required
lower limit value.
b) MAX – tap button to open a virtual keyboard to enter the required
upper limit value.
c) Buzzer Alarm – switches the alarm on and off. The alarm function
makes a beep sound as a reminder whenever the data reading
reaches the preset minimum or maximum point.
➢ To set threshold limits for the parameter values
1. Tap the Setting button at the bottom of the Live Data screen.
2. Tap the Range navigation button.
3. Select a parameter item on the left column, or enter the item name in
the Search bar.
4. Tap on the right side of the MIN button, and enter the required
minimum value.
5. Tap on the right side of the MAX button, and enter the required
maximum value.
6. Tap the ON/OFF button on the right side of the Buzzer Alarm button