User Manual V2.0 EN190628

37
The main section of the Adaptation Operation screen displays a list of operational and
vehicle status information, which mainly consists of four parts:
1. The first part in the top line shows the description of the operation being performed,
and the execution status is displayed on the right, such as Completed, or
Activated.
2. The second part shows the preconditions or requirements for executing the
operation being selected.
3. The third part displays the current conditions of the vehicle control module being
learned for comparison to the preconditions suggested by the second part. If the
current condition of the control module is out of the suggested limit value, you must
adjust the vehicle condition to meet the requirement.
4. The last part displays the instruction of how to use the functional button at the
lower right corner of the screen to manipulate the teach-in operations.
Figure 4-12 Sample Adaptation Operation Screen
Read the information carefully and check the vehicle condition accordingly, when you
are sure that the vehicle is ready to perform the adaptation, simply follow the
instructions provided to make appropriate selections. When the operation is done, an
execution status message such as Completed, Finished or Successful, displays.
Tap the ESC button to exit the function.
Generic OBD II Operations
A fast-access option for OBD II/EOBD vehicle diagnosis is available on the Vehicle
Menu screen. This option presents a quick way to check for DTCs, isolate the cause of
an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions
certification testing, verify repairs, and perform a number of other services that are