User Manual v1.0_EN

114
This function allows the user to choose the startup configuration when launch the
oscilloscope application.
On the Startup Settings screen, there are three options: Load the user default
configuration at startup, Load the previous session configuration at startup,
and Load the factory configuration at startup. Select one option according to the
specific need.
Figure 7-26 Sample Startup Settings Screen
Demo Settings
This function allows the user select the demo waveform for each channel in Demo
mode. Select one demo waveform from Nozzle voltage, Nozzle current, Ignition
signal, Sinusoidal signal, Square signal and signal of the crankshaft. The
rotating speed can be set by tapping the "-" or "+" icon to adjust the value. Tap "OK"
to confirm the settings.