User Manual v1.0_EN

8
Figure 2-5 VCMI Front View
6. Power LED – refer to Table 2-3 Power LED Description for details
7. Battery LED - refer to Table 2-4 Battery LED Description for details
8. Waveform Generator LED - lights green when operating in the waveform generator
mode
9. Multimeter LED - lights green when operating in the multimeter mode
10. Oscilloscope LED - flashes green when operating in the oscilloscope mode
11. Vehicle LED - refer to Table 2-5 Vehicle LED Description for details
IMPORTANT
Do not disconnect the programming device while this vehicle LED status light is on! If the
flash programming procedure is interrupted while the vehicle's ECU is blank or only
partially programmed, the module may be unrecoverable.
Figure 2-6 VCMI Bottom View
12. Ethernet Port
13. Vehicle Data Connector (DB26-Pin)
14. Input Channel A
15. Input Channel B