User Manual v1.0_EN

141
Figure 7-62 Sample DLC Channel Setting Screen 2
5. Swipe the Enable DLC channel to OFF to close the DLC channel and switch
to the oscilloscope function.
Figure 7-63 Sample DLC Channel Setting Screen 3
Trigger
The trigger feature is used to filter and capture specified waveform data.
According to the trigger setting condition, the trigger waveform will be captured when
the signal meets the trigger condition. When capturing waveforms, you can manually
set the trigger conditions.
When the oscilloscope is capturing the signal, tap the left column of the Trigger
button to activate the trigger function. A trigger point displays as a blue point.