User Manual v1.0_EN

153
Figure 7-80 Sample Measurement Screen 1
 Maximum – the highest level that the signal reaches
 Minimum – the lowest level that the signal reaches
 Peak To Peak – the difference between maximum and minimum
 Amplitude – the top value minus the bottom value
 Period – the duration of one cycle in a repeated pattern in the waveform
 Frequency – the number of signal occurrences per second
 Positive Duty Ratio – the ratio of positive pulse width to period width
 Negative Duty Ratio –the ratio of negative pulse width to period width
 Positive Pulse Width – the amount of time that the signal spends above its
average value
 Negative Pulse Width – the amount of time that the signal spends below its
average value
 AC RMS – the root mean square (RMS) value of the waveform minus the DC
Average
 True RMS – the root mean square (RMS) value of the waveform, including the
DC component
 DC Average – the average value of the waveform
 Rising Rate – the rate at which the signal level rises
 Falling Rate – the rate at which the signal level falls
 Rise Time – the time the signal takes to rise from the lower threshold to the
upper threshold