User Manual v1.0_EN

217
OBD Icon
This OBD button indicates the OBD device connection status. A green check mark
means the VCMI and the tablet are connected; a red X means no connection has been
established.
Start/Stop Button
You can tap the Start/Stop Button icon to start or stop the device.
Name
Button
Description
Start
Tap to start the device.
Stop
Tap to stop the device.
Settings Menu
Tap the gear-shaped icon in the top navigation bar to enter the Settings Menu.
The pin number for OBDII may be different for different vehicle modes. In Settings Menu,
you can select OBDII connector's signal pins manually if the test vehicle's actual
communication signal pins are assigned differently.
Figure 7-5 Sample Settings Menu Screen 1
At the bottom of the settings menu screen, the Protocol, Reset, Save and Close buttons
are displayed. The protocol varies according to the protocol you set.
Take CAN protocol as an example.
CAN-H: select the pin assigned for high speed CAN-bus communication line