User Manual v1.0_EN

252
 Ethernet Setting – allows you to perform network configuration.
11.1 Wi-Fi Connection
Wi-Fi Connection is an advanced function for quick linkage with VCMI. Since Wi-Fi
connection supports 5G, the MaxiSys 919 tablet and VCMI share a faster and more
stable connection when using this communication method. The tablet can be operated
up to 50 meters away from the VCMI device when connected to the vehicle.
The Wi-Fi connection is an ideal communication mode when using the oscilloscope
measurement function, See Oscilloscope for details
Figure 11-3 Sample Wi-Fi Connection Screen
 To connect the VCMI device with the tablet via Wi-Fi
1. Power on the tablet.
2. Connect the 26-pin end of the data cable to the VCMI's vehicle data connector.
3. Connect the 16-pin end of the data cable to the vehicle data link connector
(DLC).
4. Tap VCMI Manager on the MaxiSys Job Menu of the tablet.
5. Select Wi-Fi from the connection mode list.
6. Swipe the Wi-Fi toggle button to ON. Tap Refresh at the top right corner. The
device will start to search for available units.
7. Depending on the VCMI type you use, the device name may display as Maxi
suffixed with a serial number. Select the appropriate device for connection.
8. When connection is established, the connection status displays as Connected.
9. The VCMI button on the system Navigation bar at the bottom of the screen
displays a green Wi-Fi icon, indicating the tablet is connected to the VCMI
device.