User Manual v1.0_EN

254
suffixed with a serial number. Select the appropriate device for pairing.
8. When paired successfully, the connection status displays as Connected.
9. Wait a few seconds, and the VCMI button on the system Navigation bar at the
bottom of the screen shall display a green check mark, indicating the tablet is
connected to the VCMI device.
10. To disconnect the device, tap the connected device listing again.
11. Tap Back on the top left to return to the MaxiSys Job Menu.
NOTE
A VCMI device can be paired to only one tablet at a time, and once it's been paired, the
device will not be discoverable for any other unit.
11.3 Update
The Update module provides the latest update for the MaxiSys MS919 tablet. Before
updating the VCMI software, please ensure the tablet network connection is stable.
Figure 11-4 Sample VCMI Update Screen
 To update the VCMI device software
1. Power on the tablet.
2. Connect the VCMI device to the tablet via USB.
3. Tap VCMI Manager on the MaxiSys Job Menu of the tablet.
4. Select Update from the connection mode list.
5. The current version and the latest version of the software will display. Tap
Update Now to update the VCMI software.