User Manual v1.0_EN

33
b) Print All Data – prints a PDF copy of all displayed data.
3. A temporary file will be created and sent via the computer to the printer.
4. When the file is sent, a confirmation message displays.
NOTE
Make sure the tablet and the printer are connected either by Wi-Fi or LAN before printing.
For more instructions on printing, see Print Settings on page 245 for details.
 To submit Data Logging reports in Diagnostics
1. Tap the Diagnostics application button from the MaxiSys Job Menu. The pen-
shaped Data Logging button on the diagnostic toolbar is available throughout
the whole Diagnostics operations.
2. Tap the Data Logging button (a pen icon) to display the error options. Select a
specific error, and a submission form will display to let you fill in the report
information.
3. Tap the Send button in the upper right corner of the screen to submit the report
form via the Internet, and a confirmation message displays when sent
successfully.
Current Directory Path
The Directory Path shows all directory names to access the current page.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
1. VCMI Icon – indicates the communication status between the tablet and the VCMI
device.
2. Battery Icon – indicates the battery status of the vehicle.
Main Section
The Main Section varies depending on the stage of operations which shows vehicle
identification selections, the main menu, test data, messages, instructions and other
diagnostic information.
The Main Section of Auto Scan screen displays a System List for most vehicles, and a
topology map at the same time for some makes, including Volkswagen, Audi, BMW, Ford,
Land Rover, Jaguar, Chrysler, Fiat, Volvo, and more.
A. Topology Tab Page
The Topology Tab Page displays a system distribution diagram of the vehicle control
modules.