User Manual v1.0_EN

42
Tap the drop-down button on the right side of the parameter name to open a submenu.
A total of 6 buttons will be displayed: The 4 buttons to the left represent different data
display modes, plus one Information button, active when additional information is
available, and one Unit Change button, for switching the unit of displayed data, to the
right.
Figure 4-18 Sample Display Mode Screen
Each parameter item displays the selected mode independently.
 Analog Gauge Mode – displays the parameters in gauge charts.
 Text Mode – the default mode that displays the parameters as a text list.
NOTE
Status parameters, such as a switch reading like ON, OFF, ACTIVE, and ABORT can only
be displayed in Text Mode. Value parameters, such as a sensor reading, can be displayed
in both text and graph modes.
 Waveform Graph Mode – displays the parameters in waveform graphs.
In this mode, five control buttons will display on the right side of the parameter item,
allowing you to manipulate the display status.