User Manual v1.0_EN

44
2. Tap the Edit Button, and an edit window displays.
Figure 4-20 Sample Waveform Edit Screen
3. The parameter item is selected automatically in the left column.
4. Select a color from the second column.
5. Select a line thickness from the right column.
6. Tap Done to save the setting and exit, or tap Cancel to exit without saving.
NOTE
In full screen display, please edit the waveform color and line thickness by tapping the Edit
Button on the top right side of the screen.
 Digital Gauge Mode – displays the parameters in the form of a digital gauge graph.
6. Functional Buttons
The operations of all available functional buttons on the Live Data screen are described
below:
 Back – returns to the previous screen or exits the function.
 Record – starts recording the real-time live data on the current screen. If you need to
record the live data on different screens, please select all the live data you need, and
select the "Show selected", then starts the recording. The recorded live data can be
viewed in Review Data in the Data Manager application.
 Resume – this button displays when the Record or Freeze function is applied.
Tap this button to stop data recording, or exit freeze data mode, and resumes
normal data display mode.