User Manual v1.0_EN

52
Tablet must be connected to VCMI by USB.
Tablet battery must be fully charged during module programming. Connect tablet to
charger if needed.
Attach battery maintainer to vehicle battery to ensure a steady voltage is maintained
throughout programming. Voltage requirements differ by vehicle manufacturer. Consult
vehicle manufacturer recommendations prior to programming a module.
Do not quit the application during a module reprogramming as the process may fail
and may also result in permanent damage to the module.
Typical reprogramming operations require you to input and validate VIN number first.
Tap the input box and enter the correct number. The programming interface then displays.
Figure 4-27 Sample Reprogramming Operation Screen
The main section of the reprogramming interface offers information of the hardware, the
current software version and the newest software versions to be programmed into the
control units.
A series of on-screen operational instructions will display to guide you through the
programming procedure.
Carefully read the on-screen information and follow the instruction to execute the
programming procedure.
4.10.3 Re-flash Errors
IMPORATANT
When reprogramming onboard, always make sure the vehicle battery is fully charged
and in good working condition. During reprogramming, the operation may fail if voltage