User Manual v1.0_EN

7.1.3 Getting Started

Before opening the Oscilloscope application, the VCMI device must be connected to

the tablet via the provided USB cable or Wi-Fi network. For more information, see

Establish Vehicle Communication on page 19.

Figure 7-1 Sample Connection Diagram

 To open the oscilloscope application

1. Insert the applicable test lead or probe terminal ends into the input channel(s)

to complete the connection (refer to Figure 7-1).

2. Tap the Measurement icon on the Home screen of the MaxiSys MS919 Tablet.

The Measurement screen opens.

3. Tap the Oscilloscope icon to open the oscilloscope menu.

4. Select a desired testing option to continue.

NOTE

Please check the oscilloscope LED status indicator on the front panel of VCMI device.

The oscilloscope LED flashes green when operating in the oscilloscope mode.

Message Prompt

A message showing "Are you sure to open the waveform of Demo mode?" displays

after tapping the Oscilloscope icon and opening the oscilloscope menu. Please tap

"OK" to enter the demo mode or tap "Cancel" to exit.