Manual

5. RKE & RF Monitor

Today's keyless remotes -- also known as key fobs -- make life easier.

But when your key fob stops working or starts to perform

sporadically, it will be particularly frustrating. Check your key fob to

make sure it is in top condition so it will work when you really need

it.

Since a key fob is attuned to a special frequency that is only detected

by the car for which it was issued, you will need to use your vehicle

to test the fob. Otherwise you will have to take it to a dealership or an

automotive locksmith to have it tested for the right frequency. But

with our TPMS tool, the key fob testing becomes easy and

convenient.

1) Use the UP/DOWN scroll button and LEFT/RIGHT scroll

button to select RKE & RF Monitor from Main Menu (Figure

3.1), and press the Y button to confirm.

2) Hold the key fob very close to the tool and press the function

buttons on key fob to test. If the button works and the key fob is

sending a signal, the tool will beep and the screen shows as

below. If the button does not work, the tool will do nothing. To

make sure each button is working properly, please test each

button in turn.

Figure 5.1

 The progress bar indicates the approximate power level of