User Manual

24
 Press the Y button to read all sensor data, including sensor ID, tire
pressure, temperature, battery condition and modulation.
Under All Wheels mode, the tool can save up to 5 TPMS sensor data
records at each time. Press the UP/DOWN or LEFT/RIGHT scroll
button to turn over data screens while viewing. If more than five
records are stored, the latest record will overwrite the oldest record.
One Wheel Mode
In this mode the screen will show as below (Figure 4.8). The tool will
check TPMS sensor on the single wheel. Place the tool alongside the
valve stem, point toward the sensor location, and press the TEST
button. Wait for test result before moving the tool.
Figure 4.8
The tool will send LF signal to trigger the sensor. Depending on the
sensor type, the tool will activate the sensor on the first or last step.
Once the sensor is successfully activated and decoded, the tool will
display as below with a beep (Figure 4.9).