Manual

12
flashing
Turned off
Not installed
Plugged in
Red light
flashing/ Green
light on
Turned on
Not installed
Plugged in
Red light
flashing/ Green
light on
Note: The monitor can be used while charging. If the monitor is
charged using an AC adapter, with the lithium-ion battery being
installed, the output of the lithium-ion battery would be turned off
to prevent damage to the lithium-ion battery.
4. Operation Instructions
4.1 Basic Operation
NOTE: When in operation, the cable can be bent into a certain
shape. This may help you operate the cable into confined areas.
CAUTION: Keep the cable away from heat, oil, sharp edges or
moving parts. Replace damaged cables immediately.
(1) To turn the tool on, hold the handheld display unit with
LCD screen facing you.
(2) Press Power button to turn on the screen. The power
indicator light will illuminate green. The real-time image
will appear on the LCD screen.
(3) Roll the on/off switch to start the camera. This switch also
serves as a dimmer for LEDs which provide superb quality
lighting (See Fig. 10).