Full Product Manual

4. A series of instruction screens display for users to perform the particle

filter regeneration step by step. Follow the onscreen instructions and

tap OK button until the tool displays the regeneration status as below.

5. When the particle filter regeneration is complete, confirm to exit the

display. Tap Repeat to recheck the status again or tap End to exit.

Figure 5-28 Sample Repeat Screen

NOTE

In the case of a particle filter heavily loaded with soot, it can occur that the

regeneration request is blocked again after a short time or is not released.

Drive the vehicle for approximately 30 minutes at a constant speed. Then

perform the Particle filter regeneration service again.

Figure 5-27 Sample Regeneration Status Screen