Full Product Manual

3.2.1 Reboot System

In case of system crash, press and hold the Lock/Power button for 8 seconds

to reboot the system.

Installing Computer Software

The MaxiCOM MK906 Diagnostic Platform allows you to print the information

needed for your convenience. To realize the printing function, you need to

install the printer driver program.

 To install the printer driver program

1. Download the Maxi PC Suite from www.autel.com and install to your

PC.

2. Double click on Autel Run.exe item.

3. Click the MaxiSys Printer icon in the Maxi PC Suite screen.

4. Select the installation language and the printer driver installation

wizard will load momentarily.

5. Follow the wizard instructions on the screen and Click Next to

continue.

6. Click on Install and the printer driver program will be installed onto

the computer.

7. Click on Finish to complete the whole installation procedure.

NOTE: The MaxiSys Printer runs automatically after the installation. The

computer, printer and the tablet must be connected to the same network.

3.3.1 Printing Operation

This section describes how to receive file from the Display Tablet and perform

printing through the computer:

Print via PC

 To perform printing through the computer

1. Install the printer driver to the computer.

2. Before printing, make sure the Display Tablet is connected to the