Full Product Manual

21
manually.
4.3.2 Manual VIN Input
For vehicles not supporting the Auto VIN Scan function, you may manually
enter the vehicle VIN.
 To perform Manual VIN Input
1. Tap the Diagnostics application button from the MaxiCOM Job Menu.
The Vehicle Menu displays. (Figure 4-1)
2. Tap the VIN Scan button on the top toolbar.
3. Select Manual input.
4. Tap the input box and enter the correct VIN.
Figure 4-4 Manual VIN Input
5. Tap Done. Once the vehicle is identified, the Vehicle Diagnostics
screen displays. (Figure 4-2)
6. Tap Cancel to exit Manual Input.
4.3.3 Manual Vehicle Selection
The Auto VIN scan can be selected after selecting the test vehicle manufacturer.
Step-by-step Vehicle Selection
This mode of vehicle selection is menu driven; you can simply follow the on-
screen prompts and make a series of choices. Each selection you make
advances you to the next screen. A Back button at the lower right corner of the
screen returns you to the previous screen. Exact procedures may vary