Full Product Manual

28
detected with fault present is shown in red font.
Column 4 – to perform further diagnosis or testing on a specific system
item, tap the ○> button to the right of that item. A Function Menu screen
will display.
 Functional Buttons
A brief description of the Auto Scan’s Functional Buttons’ operations are
displayed in the table below.
Table 4-3 Functional Buttons in Auto Scan
Control Units
Manually locate a required control system for testing through a series of
choices. Follow the menu driven procedures and make proper selections; the
application guides the user to the proper diagnostic function menu based on
selections.
Name
Description
Back
Returns to the previous screen or exit Auto Scan.
Pause
Suspends scanning and changes to show the
Continue button.
OK
Confirms the test result. Continues to the system
diagnosis after required system is selected by tapping
the item in the Main Section.
Quick Erase
Deletes codes. A warning message screen will display
to inform you of possible data loss when this function is
selected.
Report
Displays the diagnostic data in the report form.
Save
Saves the diagnostic session as a history record, this
allows you to quickly restore access to the test
systems.