Full Product Manual

61
2. All software screens shown in this manual are examples, actual test
screens may vary for each test vehicle. Pay attention to the menu titles
and on-screen instructions to make correct option selections.
3. Before starting the procedure, make sure the vehicle has ESC button.
Look for the button on dash.
Using Land Rover as an example.
1. Tap the Service application button from the MaxiCOM Job Menu.
2. Tap SAS button and wait for the vehicle manufacturer screen. You can tap
VIN Scan or the vehicle make to acquire vehicle VIN information and tap
Yes to confirm. See Vehicle Identification on page 19 for detail.
3. Tap the desired function in the SAS function list. The list may vary by test
vehicle.
Figure 5-18 Sample SAS Function Menu
5.5.1 Steering Angle Sensor Calibration
This function allows users to perform steering angle sensor calibration and
clear records. The function options vary by vehicle.
1) Tap Steering Angle Sensor Calibration from the SAS function menu to
enter the function screen.
2) Follow the on-screen instructions to set the ignition on/off as guided. The
vehicle battery voltage signal should be in the range 12.5 – 13.5 volts to
proceed with this service, otherwise the scan tablet will display a warning
message.