User Manual

37
service and maintenance, such as to reset the service lights and perform
calibration for various systems
3. Programming/Coding – a separate section designed for quick access to
ECU reprogramming operations
After a section is selected and the tablet establishes communication with the
vehicle via the VCI device, the corresponding function menu or selection menu
displays.
4.6 Diagnosis
There are two options available when accessing the Diagnosis section:
1. Auto Scan – starts auto scanning for all the available systems on the
vehicle
2. Control Units – displays a selection menu of all available control units of
the test vehicle
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the
systems on the vehicle’s ECU in order to locate fault systems and retrieve
DTCs. The sample operation interface of Auto Scan displays as above:
Figure4-7 Sample Auto Scan Operation Screen