Full Product Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support:
- Safety Precautions and Warnings
- 1 General Information
- 2 Using the Scan Tool
- 3 Print and Update
- 4 OBDII Diagnostics
- 5 Ready Test
- 6 Compliance Information
- 7 Warranty and Service
12
Power
The scan tool is powered via the vehicle Data Link Connector (DLC). Just
follow the steps below to turn on the scan tool:
1) Connect the OBD II Cable to scan tool.
2) Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you need to
remove it before attaching the OBD II cable.
3) Plug OBD II cable to the vehicle’s DLC.
DTC Lookup
The DTC Lookup function is used to search for definitions of DTCs stored
in the DTC library and for DTC Guide information.
1) From Main Screen, use the UP/DOWN scroll button and LEFT/RIGHT
scroll button to select DTC Lookup and press the OK button.
Figure 2-2
2) From DTC Lookup screen, use the LEFT/RIGHT button to move to the
desired character, use the UP/DOWN button to change selected
digit/character and press the OK button to confirm.