Full Product Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support:
- Safety Precautions and Warnings
- 1 General Information
- 2 Using the Scan Tool
- 3 Print and Update
- 4 OBDII Diagnostics
- 5 Ready Test
- 6 Compliance Information
- 7 Warranty and Service
16
From Configure Monitors screen, use the UP/DOWN scroll button to
select Compression IGN Required Monitors, and press the OK button.
The monitors for compression ignition engines display as below:
Table 2-2
Compression IGN Required Monitors
√
MIS
√
BP
√
FUEL
√
EGS
√
CCM
√
PM
√
HCCAT
√
EGR
√
NCAT
C. Allowed INC Monitors
From Configure Monitors screen, use the UP/DOWN scroll button to
select Allowed INC Monitors, and press the OK button.
Emissions tests vary depending on the geographic or regional area in which
the vehicle is registered. To this, the scan tool provides a more flexible way
to meet different standards by allowing the user to select 0, 1, 2, or 3 “not
complete” monitors in test.
D. Reset Factory Default
From Configure Monitors screen, use the UP/DOWN scroll button to
select Reset Factory Default, and press the OK button.
It will restore the default configuration settings in the Configure Monitors
menu, and delete any customized settings. In this case, Spark IGN
Required Monitors and Compression IGN Required Monitors will
include all the available monitors, and the Allowed INC Monitors will be
set to 1.
The tool will display a message to ask for your confirmation. Select Yes to
proceed and No to exit without change.