Full Product Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support:
- Safety Precautions and Warnings
- 1 General Information
- 2 Using the Scan Tool
- 3 Print and Update
- 4 OBDII Diagnostics
- 5 Ready Test
- 6 Compliance Information
- 7 Warranty and Service
51
View Vehicle Information
The Vehicle Info. function enables retrieval of Vehicle Identification No.
(VIN), Calibration ID Nos. (CINs), Calibration Verification Nos. (CVNs) and
In-use Performance Tracking on 2000 and newer vehicles that support
Mode 9.
1) Use UP/DOWN scroll button to select Vehicle Info. from the
Diagnostic Menu and press OK button.
2) A message displays to remind you to “Turn key on with engine off!”
Wait a moment or press any key to continue.
Figure 4-39
3) Wait while the scan tool reads vehicle information.
If the vehicle does not support this mode, a message displays that
the mode is not supported.
4) From Vehicle Info. Menu, use the UP/DOWN scroll button to select an
available item to view and press the OK button.
Figure 4-40
5) View retrieved vehicle information on screen.