User Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Diagnostics
- 5 MaxiFix
- 6 Shop Manager
- 7 Data Manager
- 8 Settings
- 9 Update
- 10 Support
- 11 Academy
- 12 Remote Desk
- 13 Quick Link
- 14 Function Viewer
- 15 Maintenance and Service
- 16 Compliance Information
- 17 Warranty
26
present; “#” indicates the number of the detected faults.
Pass | No Fault: Indicates the system has passed the scanning
process and no fault has been detected.
Column 4 – to perform further diagnosis or testing on a specific system item,
tap the
○
> button to the right of that item. A Function Menu screen will
display.
Functional Buttons
A brief description of the Auto Scan’s Functional Buttons’ operations are
displayed in the table below.
Table 4-3 Functional Buttons in Auto Scan
Name
Description
Report
Displays the diagnostic data in the report form.
Quick
Erase
Deletes codes. A warning message screen will display to
inform you of possible data loss when this function is
selected.
OK
Confirms the test result. Continues to the system
diagnosis after required system is selected by tapping
the item in the Main Section.
Pause
Suspends scanning and it will change to Continue
button after tapping.
Save
Saves the diagnostic session as a history record.
ESC
Returns to the previous screen or exits Auto Scan.