User Manual

32
mode, and one Help button on the right for access to additional
information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode – displays the parameters in the form of an
analog meter graph.
2) Text Mode – this is the default mode which displays the parameters
text, displaying in list format.
NOTE
Status parameters, such as a switch reading, can primarily be viewed in text
form such as ON, OFF, ACTIVE, and ABORT. Whereas, value parameter,
such as a sensor reading, can be displayed in text mode and additional graph
modes.
3) Waveform Graph Mode – displays the parameters in waveform
graphs.
When this mode is selected, three control buttons display on the right
side of the parameter item for manipulation of display status.
 Text Button – resumes Text Display Mode.
 Scale Button – changes the scale values that are displayed below
the waveform graph. There are four scales available: x1, x2, x4 and
x8.
 Zoom-in Button – tap to display the selected data graph in full screen.
 Edit Button – tap this button to open an edit window, on which
you can set the waveform color and the line thickness displayed
for the selected parameter item.
 Scale Button - changes the scale values, which are displayed
below the waveform graph. There are four scales available: x1,
x2, x4 and x8.
 Zoom-out Button – exits full screen display.
4) Digital Gauge Mode – displays the parameters in form of a digital
gauge graph.
Full Screen Display – this option is only available in the waveform graph
mode, and primarily in Graph Merge status for data comparison. Under
this mode, there are three control buttons available on the top right side
of the screen.