User Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Diagnostics
- 5 MaxiFix
- 6 Shop Manager
- 7 Data Manager
- 8 Settings
- 9 Update
- 10 Support
- 11 Academy
- 12 Remote Desk
- 13 Quick Link
- 14 Function Viewer
- 15 Maintenance and Service
- 16 Compliance Information
- 17 Warranty
72
Firmware Upgrade
This option allows you to update the firmware of the scan tool. Connect the
scan tablet with the vehicle through DLC or use the mini USB cable for power
supply. Follow the on-screen instructions to complete the operation. Internet
connection is necessary for this operation.
Notification Center
This option allows you to turn the Notification Center function on or off. The
Notification Center function configures the MaxiCheck tablet to receive
regular on-line messages from the server for system update notifications or
other service information via the Internet. It is highly recommended to keep
this function ON all the time, to ensure notifications of updates are received.
Internet access is required for receiving on-line messages.
To enable the Notification Center function
1. Tap the Settings application on the MaxiPRO Job Menu.
2. Tap the Notification Center option on the left column.
3. Tap the ON/OFF button to enable or disable the Notifications
function. If the function is enabled the button turns blue, or if disabled
the button turns gray.
Figure 8-4 Sample Firmware Screen