User Manual

Diagnostics Operations Vehicle Identification
23
Figure 4-4 Manual VIN Input
5. Tap Done. The vehicle will be identified in a f ew seconds, and once
the matching is successful, the system will guide you to the Vehicle
Diagnostics screen directly. (Figure 4-2)
6. Tap Cancel to exit Manual Input.
4.3.3 Manual Vehicle Selection
When the vehicle’s VIN is not automatically retrievable through the vehicle's
ECU, or the specific VIN is unknown, you can choose to select the vehicle
manually.
Step-by-step Vehicle Selection
This mode of vehicle selection is menu driven; you can simply follow the
on-screen prompts and make a series of choices. Each selection you make
advances you to the next screen. A Back button at the lower right corner of the
screen returns you to the previous screen. Exact procedures may vary
somewhat by various vehicles being serviced.
4.3.4 Alternative Vehicle Identification
Occasionally, you may identify a test vehicle that the tester does not recognize;
the database does not support, or has some unique characteristics that
prevent it from communicating with the tester through the normal channels. In
these instances, you are provided with the OBD direct entry, through which
you can perform generic OBD II or EOBD tests. See 4.8 Generic OBD II
Operations on page 44 for additional information.