User Manual

Diagnostics Operations Diagnosis
34
 Description Column – detailed descriptions for the retrieved codes.
 Snowflake Icon – only displays when freeze frame data is available
for viewing; Selecting this icon will display a data screen, which
looks very similar to the Read Codes interface, therefore same
operation method may be applied.
3. Functional Button – only a Back (or sometimes an ESC) button is
available; tap it to return to the previous screen or exit the current
function.
4.6.3 Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have
been carried out, you can erase the codes from the vehicle using this function.
Before performing this function, make sure the vehicle’s ignition key is in the
ON (RUN) position with the engine off.
 To erase codes
1. Tap Erase Codes from the Function Menu.
2. A warning message displays to inform you of data loss when this
function is applied.
a) Tap Yes to continue. A confirming screen displays when the
operation is successfully done.
b) Tap No to exit.
3. Tap ESC on the confirming screen to exit Erase Codes.
4. Perform the Read Codes function again to check if the code erasing
is successful.
4.6.4 Live Data
When this function is selected, the screen displays the data list for the
selected module. The items available for any control module vary from one
vehicle to another. The parameters display in the order that they are
transmitted by the ECM, so expect variation between vehicles.