User Manual

Diagnostics Operations Diagnosis
35
Gesture scrolling allows you to quickly move through the data list. Simply
swipe the screen up or down to locate the data you want. The figure below
shows a typical Live Data screen:
Figure 4-10 Sample Live Data Screen
1. Diagnostics Toolbar Buttons – tap the drop-down button at the top
center of the screen and the toolbar buttons will display. See Table 4-2
Diagnostics Toolbar Buttons on page 24 for detailed descriptions of the
operations for each button.
2. Main Section
 Name Column – this column displays the parameter names.
a) Check Box - tap the check box at the left side of the parameter
name to make selection of an item. Tap the check box again to
deselect the item.
b) Drop-down Button – tapping the drop-down button at the right
side of the parameter name opens a submenu, which provides
various choices for data display mode.
 Value Column – displays the values of the parameter items.
 Range Column - displays the minimum and the maximum value.
 Unit Column – displays the unit for the parameters.
 To change the unit mode, tap the Setting button on the top toolbar
and select a required mode. See 7.1.1 Unit on page 64 for more