User Manual

Settings Operations Operations
67
 To enable the App Switcher function
1. Tap the Settings application on the MaxiSys Job Menu.
2. Tap the System settings option on the left column.
3. Tap the App Switcher option on the left column.
4. Mark the checkbox beside “Always show the App Switcher” on the
right side of the screen, then the App Switcher icon shows.
Short pressing the App Switcher icon opens a control panel:
 Tapping a specific app shortcut button enables you to switch directly to
the selected application screen.
 Long pressing a specific app shortcut button displays the app menu, on
which you can select and change the app shortcut.
 Pressing and dragging the App Switcher icon around allows you to
change the icon position alongside the edge of the screen.
You may refer to Android documentation for additional information about
Android system settings.
7.1.7 Firmware
This option allows you to update the vehicle communication firmware
embedded in the Display Tablet via the internet.
Before updating the firmware, please make sure the Display Tablet is
connected to a power source and the network is stable.
 To update the firmware
1. Connect the Display Tablet to a power source.
2. Tap the Settings application on the MaxiSys Job Menu.
3. Tap the Firmware option on the left column.
4. The current version and the latest version of the firmware will be
displayed. Tap Update Now to update the firmware if available.