User Manual

Diagnostics Operations Diagnosis
47
only)
c) Trigger Point – reserves a relative percentage of a record
length before the data recording start point for reference (for
Auto trigger mode only)
 To perform setting for live data record
1. Tap the Setting functional button at the bottom of the Live
Data screen.
2. Tap the Record navigation button.
3. Tap the
○
> button on the right of Trigger Type bar and select
the required trigger mode.
4. Tap the
○
> button on the right of Duration bar and select a
length of time.
5. Tap the
○
> button on the right of Trigger Point bar and
select a relative percentage of a record length to be reserved
before the data recording start point.
6. Tap Done to save the setting and return to the Live Data
screen; or tap Cancel to cancel without saving and exit
Setting.
 Done Button – confirms and saves the setting, and returns you to
the Live Data screen.
 Cancel Button – cancels the setting operation, and returns you to
the Live Data screen.
4.6.5 Active Test
The Active Test function is used to access vehicle-specific subsystem and
component tests. Available test vary by manufacturer, year, and model, and
only the available tests display in the menu.
During an active test, the tester outputs commands to the ECU in order to
drive the actuators. This test determines the integrity of the system or parts by
reading the engine ECU data, or by monitoring the operation of the actuators,
such as switching a solenoid, relay, or switch, between two operating states.
Selecting Active Test opens a menu of test options that varies by make and
model. Selecting a menu option activates the test. Follow all screen
instructions while performing tests. How and what information is presented on