User Manual

Settings Operations Operations
76
 DHCP – obtains the LAN IP address automatically
 Static IP – allows manual input of IP address
6. If Static IP is selected, you need to enter the IP values manually.
NOTE: If you are not sure about the specific IP address values, please contact
your network administrator.
7. Tap Save to save the Ethernet configuration setting; or tap Cancel
to exit without saving.
8. Tap the Home button on the top left corner to return to the MaxiSys
Job Menu. Or select another setting option for the system setup.
7.1.5 Notification Center
This option allows you to turn the Notification Center function on or off. The
Notification Center function configures the MaxiSys tablet to receive regular
on-line messages from the server for system update notifications or other
service information via the Internet. It is highly recommended to keep this
function on all the time, so you won’t miss out any new update for MaxiSys or
event from Autel. Internet access is required for receiving on-line messages.
 To enable the Notification Center function
1. Tap the Settings application on the MaxiSys Job Menu.
2. Tap the Notification Center option on the left column.
3. Tap the ON/OFF button to enable or disable the Notifications
function. If the function is enabled the button turns blue, or if
disabled the button turns gray.
4. Tap the Home button on the top left corner to return to the MaxiSys
Job Menu. Or select another setting option for the system setup.
When the Notification Center function is turned on, and new messages are
received by the MaxiSys device, a notification message displays on the
MaxiSys Job Menu. Press on the message bar and drag it down, and the
received messages are shown in the list, slide the list up or down to view all if
the message list covers more than one screen.
Tapping a specific message launches the corresponding application. For
example, if you tap on an Update notification message, the Update application
will be launched.