User Manual

96
Figure 7-3 Sample Update Confirmation Screen
3. Tap OK to update the software or tap Cancel to exit.
7.1.4.2 Firmware Update
 To update the firmware
1. Tap the Help button on the upper half of the screen. A dropdown menu
displays. (Figure 7-2)
2. Tap Update Firmware in the dropdown list. The screen will switch to the
Update section in the VCMI Management application.
NOTE
Please DISCONNECT the MaxiScope from VCMI before updating. A message
displays and tap "OK" to confirm that you have disconnected MaxiScope from VCMI.