User Manual

148
Figure 7-66 Sample Trigger Mode Screen
The table below offers brief descriptions for each trigger mode.
Table 7-6 Trigger Mode Table
Trigger Mode
Description
None
In this trigger mode, the oscilloscope can continuously capture
data, without waiting for a trigger event.
Auto
In this trigger mode, the oscilloscope will wait for a trigger before
capturing data. It can automatically update after a short period,
even if the signal does not across the trigger point.
Repeat
In this trigger mode, the oscilloscope waits until a trigger event
occurs. If there is no trigger event, nothing will be displayed on
the screen.
Single
In this trigger mode, the oscilloscope stops capturing data once
a trigger event occurs.
 Channel
Select the applicable trigger channel from the dropdown menu. The selected channel
is the one that the oscilloscope monitors for the trigger condition.