Manualshelf

User Manual

ManualsBrandsAutel ManualsAutomotiveMaxiSys MS919 Automotive Diagnostic Tool, Advanced Intelligent Diagnostics for Diagnostic Technician, 5-in-1 VCMI, TSB, Repair Assist/Tips, Module Topology, Bi-Directional Control(US IP ONLY)
171172173174175176177178179180
174
Table 7-1 Upper Toolbar
Name
Button
Description
Multimeter
Icon
Displays the multimeter connection status. See
Multimeter Icon on page 174 for more information.
Start/Stop
Button
Start or stop the multimeter device. See Start/Stop
Button
on page 174 for more information.
Display
Mode
Set the display mode. See Display Mode Menu on
page 174 for more information.
File
Print, open and save the waveform data. See File
Menu
on page 175 for more information.
Help
View the user manual, and update the APK. See
Help Menu on page 177 for more information.
Reset
Reset the digital readouts displayed in the figure
mode.
Multimeter Icon
This Multimeter status button displays the multimeter connection status. A green
check mark means the tablet and the Multimeter are connected; a red X means the
device and the tablet are not connected.
Start/Stop Button
Press this Start/Stop Button icon to start and stop the multimeter device.
Name
Button
Description
Start
Tap to start the multimeter.
Stop
Tap to stop the multimeter.
Display Mode Menu
The position of the digital readouts and waveform in the main view section can be
selected in the Display Mode Menu.
To set the display mode