User Manual

176
Figure 7-6 Sample File Menu Screen
 Print – Tap to create and print a temporary PNG picture of the current waveforms.
NOTE
Ensure the tablet is configure to print (see Printer setup instructions) and is
connected to the printer. Ensure the tablet and printer share the same network.
 Waveform File Operation
Save and open the waveform files in this section. Only Waveform mode and Digital
+ Waveform mode support this operation.
Save Waveform – Tap to capture and save the current waveforms. On the Save
File screen, tap each item to input the corresponding information and then tap Save
or Save Default to finish.
NOTE
The file name is required when saving waveforms.
Open Waveform – Tap to retrieve the saved waveforms. Tap the Edit button in the
upper right corner of the screen to select and delete the saved waveform.
Save as text – Tap to save the current waveform data to a text file. Use the ES File
Explorer app on the Android home screen to review file: Home > ES File Explorer >
Local > Internal Storage > Scan > Data > Multimeter > txt.
 Configuration Operation