Manualshelf

User Manual

ManualsBrandsAutel ManualsAutomotiveMaxiSys MS919 Automotive Diagnostic Tool, Advanced Intelligent Diagnostics for Diagnostic Technician, 5-in-1 VCMI, TSB, Repair Assist/Tips, Module Topology, Bi-Directional Control(US IP ONLY)
181182183184185186187188189190
179
Figure 7-9 Sample Main View Section Screen (Waveform Mode)
The main view section features a coordinate grid with the X-axis representing the
time duration and the Y-axis representing the amplitude level. The amplitude level
on the Y-axis can be configured in the Amplitude Settings.
Channel Selection
In the main view section, a channel has two conditions: selected and unselected. A
channel must be selected in order for the waveform to be movement, to use the
zoom-in or to add measurement rulers.
To select and unselect the channel
1. Tap the zero baseline marker or the Y-axis (the line thickens when
selected).
2. Tap the zero baseline marker or the Y-axis again to exit the channel
selection.
Waveform Zooming
The zooming function allows you to change the size and position of a signal during
or after capturing a waveform to examine it in greater details. It does not change the
stored data, but the way it displays.
The X-axis and Y-axis can be zoomed using your fingertips. The waveform can be
zoomed during or after capturing the signal.